Glass Nano Repair Instructions

Glass Nano Repair kit can help repair small damages in laminated automotive glass windshields, cracked windows or cracked glass electronic devices.

This kit should only be used on bulls-eye, spider web, star damages, and some combination breaks smaller than 1 inch (25 mm) in diameter. This kit will not repair surface pits larger than or cracks longer than 3/16 inch (5 mm).

Order the Glass Nano Repair Kit to quickly repair cracked glass.

INSTRUCTIONS:

Step 1: Clean away dirt and dust from the affected glass area. Make sure the area is dry from moisture or water.

Step 2: Squeeze repair resin into the damaged area. Apply small droplets without applying too much liquid.

Step 3: Cut the clear film to size so that it covers the entire damaged area. 

Step 4: Use the straight razor tool to carefully smooth out the clear film onto the cracked glass. Make sure there are no remaining air bubbles.

Step 5: Allow the area to dry in direct sunlight for 30 minutes, or use a UV light to quicken the process.

Step 6: Remove the cured film with the straight razor tool and scrape off excess resin to finish the repair job.